JUMO 707020/888-888-29 Programmierbar

The JUMO dTRANS T02 transmitters incorporate a microprocessor for digital signal processing. Input and output are electrically isolated. They can be mounted on a DIN rail, the
electrical connection is by screw terminals for stranded or solid wire up to 2.5mm² conductor cross-section.
Depending on the type, the 0/4 — 20mA or 0/2 — 10V output signal is available either linearized (linear with temperature) or inverted (option). The transmitters can be programmed
via the PC setup program, which is supplied as an accessory (sensor type, range, output
action, fine calibration, custom linearization).
On types 707021/… and 707022/… it is possible to additionally program the limits of the
limit comparators, and the frequency output.
Current and voltage outputs are available directly on terminals. No hardware alterations
are required.